Bespoke shoe elevation
Elevation of just one shoe is usually required if one leg is shorter than the other, which is actually more common than one might think and can be the cause of back-pains to severe headaches.
If you seek to gain some height you'll have to choose "elevation in both shoes"
Professional custom Shoe Elevation requires a lot more than just an insert, please see below for more details:
This product is no longer in stock
Since the heel-cap with the insert in place, would not be high enough to support your foot and you would slip out of your shoes when walking, we increase the height of the heel-cap to the correct height and curvature it would normally have in relation to your heel so that your foot is fully supported inside the shoe.
The same accounts for the lacing part of the shoe which needs to be increased in seize to compensate for the increased volume.
Lastly, the lift of the shoe needs to be altered upwards since otherwise walking would be impeded.
If you are looking for a on sided elevation, we recommend you seek professional medical advise to determine the proportions of the required elevation. The elevation is achieved by inserting a sloping (towards the front) insert made of strong yet light Polymer which does not "collapse" over time. This is done beneath the foot-bed.
If you seek elevation in both shoes, to increase your height, this can of course be done. We normally recommend a maximum of 2 inches where 1 inch will be done hidden inside the shoe and 1 inch by increasing heel height and sole thickness. This will be subtle and not recognizable when you are wearing the shoes. Should you seek a higher elevation up to 3 inches, we would recommend to order short boots where 2 inches can be hidden inside the boots and 1 inch will be achieved by heel height and sole thickness for a visually pleasing result.
Please add the required elevation into the field below and click on save before placing this order into your basket!
* required fields